Must-share information (formatted with Markdown ): which versions are you using (SonarQube, Scanner, Plugin, and any relevant extension) Currently on 8.5.1, upgrading to 8.9.10 what are you trying to achieve Trying to upgrade sonarqube what have you tried so far to achieve this I have done…

Trying to stop the new server using the command <SONARQUBE_HOME>/bin/linux-x86-64/sonar.sh stop, I get the message: Gracefully stopping SonarQube... SonarQube was not running. What could be the case here? Why is it not starting?

Hi, It’s not clear to me why you were trying to use a web link to restart the server during an upgrade. For future reference, those in-app links don’t do a full restart. [image] Muhammad Abdullah Hashmi: sonar.sh stop, I get the message: Gracefully stopping SonarQube... SonarQube was not runn…

Sorry, I think I wasn’t that clear. So first I use start command, then to check, I use thestop command. But then I get the message: `Gracefully stopping SonarQube… SonarQube was not running.` This means that when I first used the start command, it did not start the server. Why was that the case? …

Hi, [image] Muhammad Abdullah Hashmi: This means that when I first used the start command, it did not start the server. How long did you wait between commands? And what do your server logs say? [image] Muhammad Abdullah Hashmi: Secondly, to do the upgrade, once I kill the old process, a…

The time difference was a couple of minutes at most. I haven’t checked the server logs, will do and post them here. And yes I have read the upgrade guide. It tell me to stop the old server, start the new one, and then go to https://sonarqube.orgname.com/setup. But the issues are: 1- New server is…

Hi, If the URL says anything, then something is starting (or perhaps your old server was never shut down). Ann

I changed the sonar.web.port to 9002, and started the server. Now by checking the status, I get SonarQube is running (38041) But when I navigate to http://yourSonarQubeServerURL/setup I get the following page: [image] Moreover, the version being displayed on the bottom of the home page is still …

Hi, I don’t know what to tell you. The logs you’ve shared indicate that a DB upgrade is needed. You should make sure you have only one instance running and/or that you’re navigating to the correct URL. Since you’ve changed the ports, it’s quite possible you have 2 instances running at once. HTH…

I have stopped the old instance first before starting the new one. Going through the process again, should I keep the port of the new instance the same as the old one and then navigate to the URL? Since the old instance is stopped, the port should not be already occupied, correct?

Insufficient privileges while restarting server

SonarQube Server / Community Build

ganncamp (G Ann Campbell) January 23, 2023, 8:04pm 13

Hi,

I knew this felt familiar. We appear to have two threads going about the same topic. I’m not going to give you different advice in this thread than I did in the other one.

Ann

Topic		Replies	Views
Upgrade 9.9.8 to 2025.1. Can't upgrade DB, button doesn't work SonarQube Server / Community Build sonarqube , upgrade	14	572	January 31, 2025
SonarQube is not starting, the database must be manually upgraded SonarQube Server / Community Build sonarqube	3	4375	July 18, 2019
Upgrade Failure from SonarQube v10.5.1 to v10.7.1 SonarQube Server / Community Build sonarqube	5	187	December 12, 2024
SonarQube upgrade failing SonarQube Server / Community Build	10	1978	February 17, 2022
Upgraded SonarQube stopping automatically SonarQube Server / Community Build helm	28	1959	June 6, 2023

Insufficient privileges while restarting server

Related topics